Vertical Jerry Can Holder - by Front Runner

115.00
incl. BTW, excl. verzendkosten
Product code
JCHO003
Niet op voorraad
Our famous Front Runner lockable Jerry Can Holder reconfigured as a vertical mount for those tighter fits.
  • bewezen uitrusting & advies
    Die je kunt vertrouwen
  • 14 dagen geld terug
    Garantie
  • Off road bedacht dus sterk
    Taai

Since many of today's new jerry cans vary ever so slightly is size (due to manufacturing discrepancies), most fuel can mounting systems fail to secure the cans properly. There is often wiggle room between the carrier and the can. And that gap, however slight, causes rattle and wear. What's the point in strapping down your cans if they aren't truly secure? The Front Runner jerry can holders offer a smart no rattle no wear solution.

  • The adjustable locking steel clasp means your cans can be secured firmly in place over a lifetime of off-road abuse.
  • The new bolt on top strap means provides greater convenience when removing the jerry can.
  • For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.
  • The steel strap-downs cover the jerry can cap.
  • Add your own padlock and you'll never have to worry about stolen fuel while on the road.
  • Made of black powder coated stainless steel and is designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Because of the various mounting points, the vertical jerry can holder can be bolted to any flat surface and can be used in a wide variety of applications such as mounting to pickup truck beds or trailers. Not Suitable for Roof Rack fitment.
 
*Jerry Can not included


Consists of:
1x Jerry can holder
1x Jerry can strap
1x Latch
Bolt kit

Materials used:
Black powder-coated 3CR12 stainless steel

Product Dimensions:
Overall Dimensions:
363mm (14.3") L x 183mm (7.2") W x 480mm (18.9") H

Base Dimensions:
363mm (14.3") L x 183mm (7.2") W x 61mm (2.4") H

Base Bracket Dimensions:
363mm (14.3") L x 183mm (7.2") W x 417mm (16.4) H

Latch Buckle Dimensions:
38mm (1.5") W x 40mm (1.6") H

Strap Dimensions:
41mm (1.6) W x 3mm Thick

Weight:

5.2kg (11.5lbs)

Note:
For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.

Fitting instructions are not available.

Schrijf uw eigen review
U plaatst een review over:Vertical Jerry Can Holder - by Front Runner
Vragen over het product
Nog geen vragen. Stel als eerste de vraag!
Choose Your Country/Region


americas
europe
africa
oceania
asia
middle east