Back to Top

Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner

Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner

excl. TAX, ex-works
Product Code: KRTT900T

This kit creates a full size rack that sits above your Toyota Tacoma’s (2005 + w/OEM bed rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)) and 4 Pick-Up Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks.

  • Proven gear and advice

    You can trust

  • Built off-road


  • Designed


All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Due to load limitations of the factory bed tracks, we do NOT advise loading more than 150 lbs (68 kg). While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers’ recommendations. Until all vehicle components are made as off-road tough as Front Runner’s, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.

KRTT900T - Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner

Consisting of:

2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 24kg (53lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

Shipping Weight:

Weight 27.8kg (61.1lbs)


Product Questions

What is the distance between the the top of the bed rails and the bottom of the rack?
Question by Chris
The bottom of the rack sits 7 inches above the utility tracks that are found on the inside of the bed sides.
Answer by Front Runner
What are the dimensions from the bed of the truck up to the bottom of the rack? I have a box that is about 24-25" tall and want to know I have clearance from the rack to put the box underneath it.
Question by David
Hi! The Bed Rack sits 7 inches from the bottom of the Rack Tray to the mounting point of the bed side.
Answer by Front Runner
Wondering what the bed to underside of rack height is for a 2017 Tacoma?
Question by Vince
The Toyota Tacoma Bed Rack (KRTT900T) sits 7 inches above the bed side tracks. For further information please feel free to give us a call.
Answer by Front Runner
I have a 2012 Toyota Tacoma Access Cab (long bed). I'd like to mount a hard shell RTT to the slim line rack, hopefully keeping the tent at or below the roof line of the truck. How far above the bed rails does this rack sit?
Question by Dominic Maraglia
The Bed Rack sits around 7 inches from the top of the bed sides to the bottom of the Rack.
Answer by Front Runner
Mounted at recommended position/height, how much clearance will there be between bottom of rack and the bed?
Question by Hunter
The Bed Rack will sit around 7 inches above the bed sides so the best way to figure out your exact situation would be to measure the depth of your bed to the top of the bed sides and add 7 inches to the measurement.
Answer by Front Runner
Can this rack fit on top of a truck cap or would I/we have to purchase a cap specific rack separately?
Question by Luis
No answers yet. Be the first to answer the question!
Hey there for the rack system is there a weather cover for during the winter time. That way I can keep it on year round. I live in Canada and would like to avoid taking it off during the winter and keep the bed of my truck free from snow.
Question by Robert
We do not have a weather cover for our Slimline II Rack Trays.
Answer by Front Runner
Is it possible to get one additional pair of LASS026 - Load Bed Tray Universal Leg 188mm (Pair) for a third support? Would I need an additional RRAC901 - Toyota Tacoma / Tundra Bed Rail Nut Kit 05+? Thanks!
Question by Sean Wise
Yes! That would work. Just give us a call and we will set you up with everything you need for the third support.
Answer by Front Runner
How much weight could the roof rack or the bed rack support? I figure it's aluminum so it can't be THAT much..
Question by Ryan
Hey Ryan,

Our rack system is rated to have a curbed weight of 660 pounds, and a driving weight of about 300 pounds.
Please always adhere to the manufacturer's suggested roof load rating.

We hope this helps.
Answer by Front Runner
I would like to suggest an alternative mounting option. I would like to mount the rack just above the rear wheel well inside the bed. This would provide shallow storage under the rack. I am currently using 2X8 lumber and plywood but would much rather have your system connected to the Toyota Tacoma rail system. I would be happy to talk about it in more detail if you like the idea.
Question by Patrick Cook

We have a huge selection of different size trays and can definitely get one that fits your needs. Unfortunately, we do not have a mounting method for your preferred configuration. custom Fabrication or modification would be necessary to mount.

Best Regards,
Answer by Front Runner
Do you make a cargo bed rack to fit a 2015 Tacoma that is only 24 inches deep? I have a rollup top cover and I want a cargo rack to go over the rollup box at the front of the truck bed.
Question by riley
Hey riley,

Could you send a few photos of what you are talking about to It's difficult to say if we have something for your application without a visual. Send the photos to

Answer by Front Runner
i want to get this system for my 2010 tacoma but i want it to cover my entire bed which is 6ft long. this tray is only 1358mm (4.5ft long). is there a different tray i can get which is longer or are there side extensions and extra load bars i can buy to extend the length?
Question by tj
Yes. We have a few different length options that may fit your vehicle better. Contact us directly at 818-253-1322 or email for more info.
Answer by Front Runner
Question by Luke
Yes, this kit will work on the short bed Tacoma. This kit was designed to work with the factory cargo rail system in the bed. Thank you!
Answer by Front Runner
Is It possible to fit an OEM bed cap over top of this setup?
Question by Dylan Dembrow
Can you send some photos of your top and how is secures itself to the truck bed? Send the photos to We would like to see if the legs of our bed rack would interfere with securing your top to your truck bed.
Thanks in advance,
Answer by Front Runner

Write Your Own Review

You're reviewing: Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner

- Online shop available
North America
United States, Canada
South Africa
Rest of the World
International Website