Back to Top

Toyota 4Runner (2002-2009) Load Bar Kit / Foot Rails - by Front Runner

Toyota 4Runner (2002-2009) Load Bar Kit / Foot Rails - by Front Runner

$259.71
excl. TAX, ex-works
Product Code: KRTF053

A set of Foot Rail Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 Toyota 4runner 74mm foot rails, 2 1165mm Load Bars, 4 Foot Rail to Load Bar Adapters and fitting instructions  - all the components necessary to mount the Front Runner Load Bars to the vehicle.

  • Proven gear and advice

    You can trust

  • Built off-road

    Tough

  • Designed

    Smart

You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.

Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.

The Load Bars attach to the vehicle specific Foot Rails which in turn bolt to the vehicle’s roof using existing mounting points.

Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.

The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.

The Load Bars and vehicle specific Foot Rails can be used in the future as components to build a complete Front Runner Roof Rack.

Made from stainless steel and a durable, weather resistant black powder-coated aluminum.

Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

KRTF053 - Toyota 4Runner (2002-2009) Load Bar Kit / Foot Rails - by Front Runner

Consisting of:

1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner
1 x RRAC083 - Foot Rail to Load Bar Adapter - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 12kg (27lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.


 Shipping Dimensions:

Width 300mm (12")
Length 1785mm (70")
Height 150mm (6")

 
Shipping Weight:

Weight 14.3kg (31.4lbs)

 

Product Questions

I love the idea of this product! I however have one question for you. How does a standard soft RTT mount to these. The load bars look like they would sit at the extreme ends front to back on the roof. What is their spread? Basically are the mounting rails on a soft RTT long enough to span the gap between the load bars OR does another load bar need to be added to that middle risen mount?

Thanks!!
Question by Josh Urbach
How the Load Bars are now you will not be able to mount a RTT to them. That being said there are a few other options for placement of the Load Bars. For further info please feel free to give us a call.
Answer by Front Runner
I already have this load bar kit installed on my 4runner. The distance between the two slats at the T -slot is 55" and 5/8". I want to mount a Tepui Roof top tent to it but the tent is 56" wide. Do you know if I'll be able to mount this tent to the load bar kit? It seems like a tight fit.
Question by Andrew
With the positions of the Load Bars where they are now you will not be able to mount the tent. That being said there are a few other options you can mount Load Bars. Please give us a call to discuss the other options.
Answer by Front Runner
I've got the Load Bar kit installed on my 4runner. I'd like to add another slat on the extra position on the roof rails. I understand that I need to buy the 1165mm Slat and the end caps but is there a part I can order to shim up the other two pre-existing slats so they are all at the same height?
Question by Andrew
We do not have a part that will make the added load bar the same level of the pre existing load bars as the kit (KRTF053) was designed for only two. For further information please feel free to give us a call.
Answer by Front Runner
I am looking at getting a larger size roof top tent (72"x48" foot print) and am wondering if it would be possible to add a extra load to the rack for extra support for the tent? And how much that would cost?
Question by Matt
Yes. You can add an extra Load Bar to the 4th Gen 4runner Load Bar Kit (KRTF053). That being said you will have to re-mount the preexisting Load Bars to the top of the Foot Rails to be at the same level of the additional load bar. The parts you will need to order are Slat To Load Bar Conversion End Cap Kit (RRAC044)($17.95) and a 1165mm Slat (RRSS1165) ($48.95).
Answer by Front Runner
Is this compatible with the roof top tents and what's the weight it can hold?
Question by Lucas
Yes. The Toyota 4Runner Load Bar kit (KRTF053) is compatible with roof top tents. The rack tray's load capacity is 660 lbs, As for the vehicles roof load rating you will have to contact the vehicle manufacture.
Answer by Front Runner

Write Your Own Review

You're reviewing: Toyota 4Runner (2002-2009) Load Bar Kit / Foot Rails - by Front Runner

Select a country

- Online shop available
North America
United States, Canada
Europe
Europe (Excluding Germany)
Germany (D.A.CH)
Africa
South Africa
Australia
Australia
Rest of the World
International Website