Stainless Steel Prep Table w/ Basin - by Front Runner

R 2,495.01
incl. VAT, excl. Shipping
Product Code
TBRA004
This lightweight and sturdy stainless steel table features aluminum locking legs, a basin cut out and is the perfect narrower size for washing up and food preparation. Can be stored UNDERNEATH most full sized Front Runner Slimline II Roof Racks.

  • Proven gear and advice
    You can trust
  • Built off-road
    Tough
  • Designed
    Smart
A lightweight and sturdy stainless steel tabletop with a cut out which fits a basin.
  • Aluminum locking legs.
  • Included Basin fits into table for convenient camp site sink.
  • Ideal solution for food preparation and washing up.
  • Sturdy and lightweight.
  • Hygienic, easy to clean stainless steel top.
  • Ultra slim, can be mounted for transport underneath the Front Runner Slimline II Roof Rack using the Under-Rack Table Slides.


*For details on fitment see below.


* WILL A FRONT RUNNER TABLE FIT UNDER MY SLIMLINE II ROOF RACK?

There are 2 factors to consider:

Is the roof rack TALL ENOUGH?

  • All Roof Rack kits with a designated “TALL” mounting option have room to fit a table underneath. If your Slimline II Roof Rack uses a Front Runner Foot Rail mounting system, a table will also fit underneath.
  • Many other Front Runner Roof Rack kits have enough height to mount a table underneath, but please keep in mind, we recommend 65mm (2.5") of clearance between the bottom of the roof rack and the highest point of the roof.


Is the roof rack LONG ENOUGH?

  • For REAR MOUNT installation, the table requires a Slimline II Roof Rack that is 1358mm or longer (“7 slats”). Please check the SPECS tab on any Slimline II Roof Rack for exact measurements of the rack tray.
  • For a SIDE MOUNT installation, the table requires a 3 slat opening (the space between feet/legs). All Front Runner Foot Rail mounting systems have an opening that fits all widths of tables.


NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.

If you’re still not sure if your rack will work with a table underneath, please contact us.

Materials used:
High grade 25mm x 25mm (0.98" x 0.98") aluminium frame
30L (7.92 gallons) basin
3CR12 1.2mm stainless steel top

Product Dimensions:
L 1150mm (45.3") x W 550mm (21.7") x 28mm (1.1")
Height when opened:670mm (26.4")
Weighs approx. 9kg (18lb)

Fitting instructions are not available.

Product Questions
What are the dimensions of the basin cut out? Any plans of making a grill for the cut out?
Question by: MJ
The hole size is approximately 14.5" by 11.5"
Answer by: Front Runner
Choose Your Country/Region


americas
europe
africa
oceania
asia
middle east