Expedition Rail Kit - Full Perimeter - for 1345mm(W) Rack - by Front Runner

R 3,190.00
incl. VAT, excl. Shipping
Product Code

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1345mm wide Front Runner Slimline II Roof Rack.

Get your goods upfront and pay for them over 3 interest free instalments of R1,063.33. Standard shipping terms apply.
Find out how »

  • Proven gear and advice
    You can trust
  • Built off-road
  • Designed

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.

  • Install in minutes.
  • No drilling required.
  • Adds extra cargo support.
  • Attractive, low profile design.
  • Mounting hardware included.
  • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
  • Manufactured with corrosion resistant, high-density aluminum components.
  • The Expedition Rails add 61mm / 2.4” to the height of the roof rack.

The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.

DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!

PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.

Consists of:
2x RRAC067 - Expedition Tubing G (570.5mm)
2x RRAC071 - Expedition Rail Corner Set
2x RRAC072 - Expedition Rail LH & RH Drop Set
3x RRAC073 - Expedition Rail Joiner
1x KRXX001 - Expedition Rail Middle Kit

Materials used:
Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions:
Min: 752mm (29.6") - Max: 2772mm (109.1") L x 1345mm (53") W x 112mm (4.4") H

8.26kg (18lbs)

Product Questions
Will the expedition rack interfere with my existing Hi-Lift jack installation using Front Runner brackets?
Question by: Paul
Paul, The high lift jack mounts would have to be fitted to our rack in-between the expedition rail joiners. You would have to carefully plan the placement of the mounts but you should be able to a achieve this easily. -Bryan
Answer by: Front Runner
Hi There, Is the 4" height, referenced in the specs, 4" from the bottom of the rack (effective height of the corner) or is it 4" from the top of the rack? I am assuming it is 4" from the bottom of the rack, but want to confirm before ordering.
Question by: Adam
Adam, The total height of 4.4" would be the height of the corner, which would also be the total height from the bottom the the rack to the top of the expedition rails. Our rack system is 2" tall and adding the expedition rails would add 2.4" more in height. Respectfully, Bryan
Answer by: Front Runner
what is the diameter of the expo rail tubing?? wall thickness?? thanks!!
Question by: scott kimmich
Scott, The diameter of the tubing is about 20mm and the walls of the tubing are about 1mm thick. All tubing is stainless and powder-coated also.
Answer by: Front Runner
Choose Your Country/Region

middle east