Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit

• This low-profile flat deck Slimsport rack has a load-carrying area of 2637mm (103.8") L x 1383mm (54.5") W.
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
• Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
• The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
• Need a lightbar? The optional lightbar fairing Toyota Sequoia (2023-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
• Fitment guide and all mounting hardware included.
• 6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
• Note: Under Rack Tables are not compatible with the Slimsport rack kit range
• Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.

KSTS002T - Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit

Consisting of:
1x KSTS001 - Toyota Sequoia (2023 - Current) Slimsport Tray
1x RRAC285 - Toyota Sequoia (2023 - Current) Slimsport Rack Win

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Assembled Rack Kit Dimensions:
2637mm (103.8“) L x 1383mm (54.4“) W x 170mm (6.7“) H

Approximate Installed Weight: 45.78kg (100.93lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")

Shipping Weight:
Weight: 46kg (101lbs)