Back to Top

Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner

Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner

MSRP $1,250.00
$1,042.00
FREE SHIPPING
to the lower 48 states*
Product Code: KRTF051T

This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (4th Gen). It easily installs using the existing factory mounting points. No drilling required.

  • Proven gear and advice

    You can trust

  • 30 day money back

    Guarantee

  • Built off-road

    Tough

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRTF051T - Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner

Consisting of:

1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 30kg (65lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

 
Shipping Weight:

Weight 34.4kg (75.7lbs)

 



Product Questions

Does the rack have brackets/cross-members that would allow for a roof top tent to be mounted? I'm looking for something that will allow for my RTT and a couple of light boxes to be placed on roof of my 4th gen 4runner.
Question by Denny
Yes, roof top tents are one of our favorite accessories! The Toyota 4Runner (4th Gen) Roof Rack (KRTF051T) has the ability for a Roof Top Tent to be mounted . As for extra storage, it will depend on the size of RTT you install. For further information please feel free to give us a call.
Answer by Front Runner
What is the total height of the rack above the roofline?
From the specs section, it looks like the feet are 74mm tall + the 50mm of the rack itself, for a total of 124mm. Is this correct?
Thank you!
Question by Fred
The foot rail is 71mm and the rack is 50mm tall, together they should be 121mm. Accounting for spacers, the rack should rest very close to 125 mm. (or 4.9 inches)
Answer by Front Runner
Does the rack cover the sun roof of the 4runner?
Question by andrew
Andrew,
Yes. Our 4Runner rack does cover part of the sunroof when installed. Our roof rack is customizable and you can slide the cross-members out of the way of the sunroof if needed.

-Bryan
Answer by Front Runner
I currently have spoiler along with the gobi ladder and wanted to know if the rack would clear it.

thank you.

btw its for a 2007 Toyota 4runner.
Question by Keak
Unfortunately we have not test fit these items to work together. If you are able to send us some photos and measurements we should be able to tell if there will be an issue or not. Thank you
Answer by Front Runner
Do you make a full size rack for the 4th Gen 4Runner?
Question by Tim
At this time we do not offer a full length rack for the 4Runner. There are no mounting holes forward of the sunroof. In order to properly secure a full length rack you would need to drill into the roof of the vehicle. Extending the rack forward without properly securing will cause extra wind noise, chattering, decreased load capacity, and even damage to the rack or roof.
Answer by Front Runner
I would like confirmation that this rack will work with a 4th Gen 4Runner with the rear spoiler. I have a 2006 SE 4Runner with rear spoiler and want to have confirmed that this rack will fit appropriately.
Question by Travis
The 4th gen rack kit will clear the spoiler without any issue. Thank you.
Answer by Front Runner
Is there any latitude to adjust the rack position slightly forward on the factory mounts to allow clearance for a tailgate mounted ladder with the tailgate in the "up" position?
Question by Jim
The holes on the bottom of the mounting brackets are slotted to allow for a little adjustment. Unfortunately it is hard to say if it will be enough or not with your ladder.
Answer by Front Runner
What is max weight that can be held on rack?
Question by Wade
The rack is rated to 660 lbs, but in order to know how much weight the roof itself can handle, you would need to check with the manufacturers specifications.
Answer by Front Runner
do you make slimline 2 for the 3rd generation toyota 4runner 1999 model? if so, do you make full size racks for it?
Question by Lex
We've adapted universal racks to that vehicle in the past. Unfortunately a 3/4 rack is the largest we can fit.
Answer by Front Runner

Write Your Own Review

You're reviewing: Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner

How do you rate this product? *
Rating

People are viewing:

Toyota 4Runner (5th Gen) 3/4 Slimline II Roof Rack Kit - by Front Runner
Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit - by Front Runner
Toyota FJ Cruiser Slimline II Roof Rack Kit - by Front Runner
Expedition Rail Kit - Full Perimeter - for 1255mm(W) Rack - by Front Runner
40"/1016mm LED Flood/Spot Combo w/Off-Road Performance Shield - by Front Runner
Expander Camping Chair - by Front Runner
Double Jerry Can Holder - by Front Runner
Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Expedition Rail Kit - Front or Back - for 1255mm(W) Rack - by Front Runner
Spare Wheel Step - by Front Runner
Black Tie Down Rings - by Front Runner
Stainless Steel Tie Down Rings - by Front Runner
Easy-Out Awning Brackets - by Front Runner
Corner Brackets - by Front Runner
$77.95
In stock
Wolf Pack - by Front Runner
$39.95
In stock
6 Cub Box Drawer w/ Cargo Sliding Top - by Front Runner

Select a country

- Online shop available
North America
United States, Canada
Europe
Europe (Excluding Germany)
Germany (D.A.CH)
Africa
South Africa
Australia
Australia
Rest of the World
International Website