Back to Top

Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner

Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner

MSRP $336.00
$280.00
Product Code: KRTT901T

This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005+

  • Proven gear and advice

    You can trust

  • 30 day money back

    Guarantee

  • Built off-road

    Tough

If you don’t currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Tacoma factory bed rails.

This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005 +

DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!

The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.

The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.

The sliding nut t-slots on the slats allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.

Accessories can be mounted to t-slots on the top and bottom of the Load Bars.

KRTT901T - Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner

Consisting of:

2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 7kg (15lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.


 Shipping Dimensions:

Width 130mm (5")
Length 1270mm (50")
Height 240mm (9")

 
Shipping Weight:

Weight 7.9kg (17.4lbs)

 

Product Questions

I am interested in using 3 load bars for a Tepui Kukenam XL Ruggedized tent. I am just wondering if these would withstand the load with that and having 2 - 3 people in it. What is the maximum load these bars can reliably hold?
Question by trent
For a tent that large, plus the load of three people (est 660lbs/300kg), we would recommend a full rack with at least one extra set of bed legs (three legs per side total). That system would support that estimated amount of weight in a static condition, but the weakest link will be the factory tracks on the bed rail of your vehicle. You should not exceed the load rating on the factory tracks, which can be found in the owner's guide, or by consulting the manufacturer.
Answer by Front Runner
Can you tell me if the tent quick releases fit on the load bars? Or are those just for the rack?
Question by Rickey Tolliver
The Quick Release Tent Mount Kit (Sku TBMK008) only works with the rack. Each mounting foot need two slats to bolt to in order to maintain the direction of the quick release.
Answer by Front Runner
Will these work on a 2017 Tacoma with the 5' bed and tonneau cover? I would like an easy on/off solution for the bed when the tonneau is not in use. The application would be clamping Yakima J-Low kayak carriers to the bars in the bed.

Question by Keith Combs
Yes, this kit should work! The tonneau cover would have to be completely off and the kayak carrier would need to be able to clamp to the 3 5/8 inches slat of our rack.
Answer by Front Runner
Is the Frontrunner RTT compatible with these load bars?
Question by Cody
Yes. The Front Runner RTT (TENT031) is compatible with Toyota Tacoma Load Bed Load Bar Kit (KRTT901T).
Answer by Front Runner
So I'm currently looking at buying your Load Bed Load Bar Kit for my Tacoma and am trying to mount a Tepui Kukenam SKY tent to the bars. I was wondering if I'm also going to have to purchase your Tent mount kit for the installation, or does the brackets already supplied with the tent work? Also is read in the other questions that you recommend 3 Load Bars for a bigger tent is there a ability to purchase just a single load bar if I end up needing the additional weight support?
Question by Jack
As long as the brackets provided with the tent are long enough to fit the width of our slats which are 90mm (4 inches) you will not need additional mounting hardware. As for an additional load bar you will not be able to order one online. Give us a call and we will put the order through for you.
Answer by Front Runner
Can the load bars be sold individually or do they only come in pairs?
Question by Paul
They can. Please contact us for ordering info.
Answer by Front Runner
I currently have the slimline II roof rack for my 2015 Tacoma and would like the convenience of removing the tray and leaving the rails on the truck roof, and mounting only the tray on the bed in a similar manner to KRTT900T?

Do you guys have the bed brackets similar to "2 x LASS026 - Load Bed Tray Universal Leg 188mm (Pair)" to make that possible?

Question by Ramon
Sorry! That won't work. The rack tray for product KRTT900T is larger than the cab rack for the Tacoma, and the cab rack would not be wide enough to mount in the bed of the truck.
Answer by Front Runner
Would these bars for the 2005+ Tacoma fit on the 2016 Tacoma too?
Question by Johan
Yes. This kit will work for all Toyota Tacoma's 2005 - 2016.

Bryan@FrontRunnerOutfitters.com
Answer by Front Runner
Can this be used upside down in the bed? I'd like to keep a flat cover over them when not in use, so would need it below the top of the bed rails.

Question by Matthew
No answers yet. Be the first to answer the question!
How high above the bed is the rack on a Frontier with factory bed rails? Also, for a large RTT and 3 people, would I need 3 bars?
Question by Travis
Travis,

The total height would be 8-9 inches from the top of your truck bed. The amount of load bars would depend on total weight of the tent and people sleeping in the tent. I would definitely recommend three load bars for three adults.

-Bryan
Answer by Front Runner
Will this also work for a 2014 Nissan Frontier that already has utility tracks installed from the factory?
Question by Gary
The fitment is correct for the Frontier. The only different is the square nuts needed to fit the Nissan OEM Tracks. Please give us a call or email Steve so we can go over what is needed for proper fitment. Thank you
Answer by Front Runner
Has this been tested on the Frontier?
Question by Rod
Yes the load bar kits for the Tacoma and Frontier are the same in size. The only difference is the size of the square nuts for the OEM tracks that are in the bed of the truck, if you have factory tracks. If you do not we sale the same kit but with universal truck bed tracks to install.
Answer by Front Runner
What is the max payload of the bed load bars?
Question by 2013BLUETRD
With a load evenly distributed the load bars can easily withstand a few hundred pounds.
Answer by Front Runner

Write Your Own Review

You're reviewing: Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner

How do you rate this product? *
Rating

People are viewing:

Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Wolf Pack - by Front Runner
$39.95
In stock
Ratcheting Spade/Shovel Mount - by Front Runner
Stainless Steel Tie Down Rings - by Front Runner
Slanted Water Tank - by Front Runner
Water Tank / 67l/17.7Gal - by Front Runner
Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit - by Front Runner
Drop Down Table - by Front Runner
Expander Camping Chair - by Front Runner
Hi-Lift Jack Bracket - by Front Runner
Pick-Up Truck Slimline II Load Bed Rack Kit / 1425(W) x 1358(L) - by Front Runner
Black Tie Down Rings - by Front Runner
Jeep Wrangler JKU 4-Door Cargo Storage Interior Rack - by Front Runner
Plastic Water Jerry Can With Tap - by Front Runner
Upright Water Tank With Two Cut-Outs / Flat - by Front Runner
Water Tank / 60l/15.9Gal - by Front Runner
- Online shop available
North America
United States, Canada
Europe
Europe
Africa
South Africa
Australia
Australia
Rest of the World
International Website