LED Remote Control - by Front Runner

MSRP $41.94
$ 34.95
In stock - available for immediate delivery
Product Code
ECOM095

​The Front Runner LED Remote Control Kit allows for the use of your Front Runner LED Flood Light by remote control.

  • Proven gear and advice
    You can trust
  • 30 day money back
    Guarantee
  • Built off-road
    Tough

​A small inductor connects to the LED Flood Light using the Wiring Harness which allows you to use your LED Flood Light from a distance by using a remote control. This remote control kit also adds additional functionality by allowing the LED Flood Light to flash as well as send out an SOS sequence.


The remote control includes a strap with key-holder and has 4 buttons with different functionality. The kit also allows for 9 different flash patterns.

 

Consists of:
1x Remote Control
1x Inductor
1x Double Sided Tape

Product dimensions:
60mm (2.4") L x 70mm (2.8") W x 30mm (1.2") H

Other specifications:
Input Voltage:
10-30V DC

Max Amp:
1.35A (the cable)

Frequency:
433MHZ

Effective distance:
50m

Waterproof:
Yes

*A PDF viewer is required to view the fitting instructions.

Write Your Own Review
You're reviewing:LED Remote Control - by Front Runner
Your Rating
Product Questions
I already have my lighting fitted and working but would like to incorporate this remote. Would I be able to remove the plugs and splice into my existing wiring?
Question by: Keith
Yes, the relay can be spliced into your existing wiring. If you have lights and a wiring harness from Front Runner, it should plug right in. If you have to splice it yourself, make sure all the leads are connected in the correct configuration.
Answer by: Front Runner
Dear sir, if I'm not using your product Wiring Harness , how to connect the difference colour wire from battery-to-buttom-relay.rnrnThanksrnRocky Lam
Question by: Rocky Lam
We recommend using our wiring Harness ( ECOM103). This will be the safest option and simplify the installation.
Answer by: Front Runner
Is the wireless communication done via IR or radio? Does this kit work with any 12V lights?
Question by: Dan
The transmitter is radio. We have only tested it with 12v LED lighting, which has a low amp draw. I imagine any 12v signal could be used, but I am not aware of the load restrictions. Thank you
Answer by: Front Runner
- Online shop available
North America
img
United States, Canada
Europe
Africa
img
South Africa
Australia
img
Australia
Rest of the World
International Website
This is the privacy policy sample page.
It was created automatically and do not substitute the one you need to create and provide to your store visitors.
Please, replace this text with the correct privacy policy by visiting the Customers > GDPR > Privacy Policy section in the backend.