Check new arrivalshere!
Outfit your vehicle
Offline mode
Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount

Land Rover Defender (1983-2016)Load Bar Kit / Gutter Mount

Front Runner
|
SKU: KRLD024
$42300
$423.00
LIFETIME
WARRANTY*
FREE SHIPPING
ON MOST ORDERS*
0% APR available for 6, 12, and 18-Month Financing*,
As low as $19/Month for 24-Months*

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions  - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions  - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.

In stock, ships in 1-2 working days

Proven gear and advice

You can trust

30 day money back

Guarantee

Built off-road

Tough

REVIEW HIGHLIGHTS
5.0 star rating

Better than what it says on the tin

Great rack, great quality Don’t mess around with other alternatives

John M.

MORE REVIEWS
Info

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.

You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.

Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.

The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.

Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.

The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.

The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.

Made from stainless steel and a durable, weather resistant black powder-coated aluminum.

Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.

Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.

WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
KRLD024 - Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - by Front Runner


Consisting of:


2 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner



Material used:

Black epoxy powder-coated T6 aluminium
High strength steel


Approximate Installed Weight 8kg (18lbs)


The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.


To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.



Shipping Dimensions:

Width 130mm (5")
Length 1540mm (61")
Height 195mm (8")




Shipping Weight:


Weight 9.5kg (21.0lbs)


Installation Instructions for LASS107 (EN)
View / Download
Installation Instructions for WDLB001 (EN)
View / Download
*A PDF viewer is required to view the fitting instructions.
{{category_id:74}},{{category_id:75}},{{category_id:120}}

Related Products

Frequently Asked Questions

PRODUCT QUESTIONS

What is the load rating of the Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount (KRLD024)?

Got More Questions?

Visit our Help Center or talk to a support expert, available from Monday to Friday, 9AM - 5PM PST.

Call 1 (818) 253-1322
United States to GermanyClose
Flag of Germany
Welcome

Come here for information throughout the shopping experience to learn more about what to expect when bringing goods into Germany.

Duties and Taxes

In Germany you can spend up to 150 EUR and not incur any duty on your order. VAT is 19% and due on any order above 0 EUR.

As you add items to your cart, you can return here to get more detailed calculations on possible duty and VAT.

Powered by
de | en
duty and tax information for Germany