Slanted Water Tank - by Front Runner

$ 170.00
excl. VAT, excl. Shipping
Product Code
WTAN008
This 50l (13.2gal) slanted water tank is intended to maximise space utilisation by fitting behind the back seats of utility vehicles and the slanted shape compensates for the slant in the back seats.​​

  • Proven gear and advice
    You can trust
  • Built off-road
    Tough
  • Designed
    Smart
This 50l (13.2gal) slanted water tank is intended to maximise space utilisation by fitting behind the back seats of utility vehicles and the slanted shape compensates for the slant in the back seats.

This tank is universal in terms of its implementation; it can be used in custom storage systems, motorhomes, other vehicles and other many other instances.

Made from food grade polyethylene and is BPA free.

50l (13.2gal) capacity.

This tank has plastic pipe fittings.
The Water Tank Hose Kit for this water tank is sold seperately.
Material used:
Tank: BPA-free polyethylene
Fittings: Plastic
 
Capacity:
50l (13.2gal)
 
Product Dimensions:
W 1000mm (39.4") x H 350mm (13.8") x L tapered 200mm (7.9") to 150mm (5.9")
 
Weight:
5.08kg (11.2lbs)
 

Fitting instructions are not available.

Product Questions
Do you need to presurize these tanks, or are these gravity fed to allow the tanks to empty?
Question by: Cameron Garcia
Our tanks can be gravity drained or you can use an inline pump.
Answer by: Front Runner
Hi, is there any issue with having this water tank on the roof rack? I will not have it there permanently just for a 10 day trip.
Question by: Josh
The tank was designed for a "behind the seat" application but you can store it on a rack, with custom modification, as long as all weight limits and warnings are observed. All of our water containers are BPA free and are a dark grey color. Dark colors allow less light to pass through which reduces growth of waterborne algae.
Answer by: Front Runner
What is the thickness of the material.
Question by: Steve Kuhn
The material is 10mm thick.
Answer by: Front Runner
Is there a syphon or 90 degree fitting inside to get the water off the bottom of the tank?
Question by: Roy
A 90 Degree fitting can be added to Water Tank.
Answer by: Front Runner
do you make this tank with the filler and the hose on the right hand side rather than the left as pictured as I would like to put it inside a van with door on passenger side
Question by: mark
Hi - The knockout is only on one side. Please check out all our other water carrying solutions. Hopefully something else will work for you!
Answer by: Front Runner
Does the tank have any anti-slosh features in the interior design? Concerned about the noise of the water splashing around if it's mounted behind the rear seat of my '13 Tacoma.
Question by: Blane Woodfin, Jr.
No, the water tanks do not have baffles in them to limit noise because they would decrease the amount of water the tank could carry and add weight.
Answer by: Front Runner
i was wondering if anyone has seen this used in the 3rd gen crewman tundra behind the rear fold up seats?
Question by: luis
Good question, We have not seen that application done before. That being said under specs on the product you will find the dimensions of the water tank that you can cross reference with the measurements from the Tundra.
Answer by: Front Runner
Choose Your Country/Region


americas
europe
africa
oceania
asia
middle east