Back to Top

Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner

Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner

Delivery Time: 1-2 Business Days
Product Code: KRLD029T
This 1560mm/61.4" 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Discovery LR3/LR4. It easily installs using the existing factory mounting points. No drilling required.
  • Proven gear and advice

    You can trust

  • 14 days

    Right to cancel

  • Built off-road

    Tough

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

If your vehicle has a DAB antenna, the table can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate the table to mount from the rear of the roof rack.

**Please note. This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRLD029T - Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner

Consisting of:

1 x FALD004 - Land Rover Discovery LR3 & LR4 1/2 Rack Foot Rails - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 28kg (62lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

 
Shipping Weight:

Weight 32.7kg (72.0lbs)

 



Product Questions

I am looking for a rack that I can mount a camera tripod on and stand next to operate. Will the cross bars support the weight of a full grown man?
Question by Patrick
The cross bars will absolutely support the weight of a full grown man.
Answer by Front Runner
Is the roof rack compatible with a Yakima load box if needed?
Question by Justin Barden
As long as the mounting hardware that comes with that box is able to clamp around our slats it will be fine. Our slats are 3.5 inches wide.
Answer by Front Runner
Can the sun roof open all the way with this rack?
LAND ROVER DISCOVERY LR3/LR4 SLIMLINE II 3/4 ROOF RACK KIT - BY FRONT RUNNER
Question by collin
Yes. You will be able to open the sunroof all the way with the LR3/LR4 3/4 Roof Rack (KRLD029T) installed.
Answer by Front Runner
Slimline II mounted with foot rails directly onto Land Rover Discovery 4. What is the maximum load that can be carried off road please.
Question by Mario
While the rack is designed to carry very heavy loads in excess of 300kg’s under testing on a bench, which is way more than your vehicle can safely carry.

You need to take your vehicles handling capabilities and carrying strength into account.

We suggest that you consult your vehicle owner's manual to determine your specific vehicle's Safe Working Load weight.
Answer by Front Runner
Does the rack leave enough clearance for the satellite link on the roof of the LR3/LR4 or do you have to reposition the crossbars to accommodate it? And, what is the roofline (or factory tracks) to the top of the roof rack height?
Question by Peter
The LR3/LR4 Front Runner Roof Rack (KRLD029T) is designed to accommodate the satellite antenna. As for the hight of the rack it is around 4 1/2 to 5 inches from the top of the roof to the top of the rack.
Answer by Front Runner
Is this version compatible with the full length OEM rails?
Question by Chris
The OEM rails are not needed as the Front Runner Rack kit (KRLD029T) comes with its own Foot Rails designed specifically for the Rack Tray and Disco LR3/LR4. For any other questions please feel free to give us a call.
Answer by Front Runner
Is this roof rack compatible with any roof tents? If so can you please recommend some models? Thanks!
Question by Jake
This roof rack is compatible with all roof top tents, but we recommend the Front Runner Roof Top Tent Roof Top Tent : )
Answer by Front Runner
Is the rack compatible with the LR fitted roof rails? I have a 2014 D4 with full length roof rails.
Question by Peter Gibb
No the rack does not fit onto the LR factory fitted roof rails. The rack comes with its own mounting system that fits to the roof using the existing mounting points after you have removed the factory fitted rails.
Answer by Front Runner

Write Your Own Review

You're reviewing: Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner

- Online shop available
North America
United States, Canada
Europe
Europe
Africa
South Africa
Australia
Australia
Rest of the World
International Website