Back to Top

Grab-On Slimline II Roof Rack Kit / 1255(W) x 1762(L) - by Front Runner

Grab-On Slimline II Roof Rack Kit / 1255(W) x 1762(L) - by Front Runner

In stock, usually ships in 24 hours
Product Code: KRGO015T

Front Runner Grab-On Feet cargo carrying roof rack kits come in various sizes and easily mount to most vehicles with existing factory/OEM roof rails. This kit includes 6 clamping Grab-On Feet and a 1255(W) x 1762(L) Slimline II Tray.

  • Proven gear and advice

    You can trust

  • 14 day money back

    Guarantee

  • Built off-road

    Tough

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

The rubber padded stainless steel Grab-On Foot adjusts to fit factory rail diameters from 20mm (0.8") to 45mm (1.8") wide by using the appropriate clamp size.

Three bracket sizes are included with each Grab-On Foot for use with different factory/OEM roof rail widths.

NOTE: Not suitable for Flush mount factory rails.

KRGO015T - Grab-On Slimline II Roof Rack Kit / 1255(W) x 1762(L) - by Front Runner

Consisting of:

3 x FAGO004 - Grab-On Feet (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 28kg (62lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

 
Shipping Weight:

Weight 32.6kg (71.8lbs)

 



Product Questions

Hi guys . Will this rack fit a Mitsubishi 2016 LWB NX Pajero . The dimensions seem right but was wondering if the grab on feet will fit the factory rails. Thanks.
Question by Lyndon Ruis
The mounting system (Grab On) will work, but the 1762 mm long rack will be too long. Max length can only be 1560 mm.
Answer by Front Runner
G'day guys . I am wondering if this will fit on a 2016 Mitsubishi NX Pajero with factory roof rails. I cant see the dimensions being an issue but am more concerned with the foot spacing's and the mounts fit - compatibility to the factory rails
Question by Lyndon
The grab on feet will fit and while the max length should be 1560 mm, the 1358 mm rack will work the best. For the 1560 mm rack, you would need three pairs of grab on feet.
Answer by Front Runner

Write Your Own Review

You're reviewing: Grab-On Slimline II Roof Rack Kit / 1255(W) x 1762(L) - by Front Runner

Select a country

- Online shop available
North America
United States, Canada
Europe
Europe (Excluding Germany)
Germany (D.A.CH)
Africa
South Africa
Australia
Australia
Rest of the World
International Website