Mercedes-Benz Sprinter (L1H2/128" SWB/high Roof) (2006-Current) Slimpro Van Rack Kit

• Compatible with Mercedes-Benz Sprinter L1/H2 / 128" SWB high roof vans with a vehicle length of 5267mm / 207.4".
• Load-carrying area: 2569mm (101.1") x 1470mm (57.9").
• Eight (8) Mounting Feet secure into the van's existing factory mounting points.
• Included Slat Bracket can be inverted for a lower profile at 107mm (4.2") height, or left in standard configuration at 157mm (6.2").
• Compatible with most Front Runner side mount accessories.
• Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
• Fitment guide and all mounting hardware are included. No drilling or modification is required.
• All Front Runner racks are backed by a limited lifetime warranty.*

* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

KVMS006T - Mercedes-Benz Sprinter (L1H2/128" SWB/high Roof) (2006-Current) Slimpro Van Rack Kit - by Front Runner

Consisting of:
4x FAVF004 - Mercedes-Benz Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 14.54kg (32.06lbs)

Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 165mm (6")

Shipping Weight:
Weight: 37kg (81lbs)