Vertical Jerry Can Holder - by Front Runner

115.00
incl. VAT, excl. Shipping
In stock, ships in 1-2 working days
Rating:
100% of 100
Product Code
JCHO003

Our famous Front Runner lockable Jerry Can Holder reconfigured as a vertical mount for those tighter fits.
  • Proven gear and advice
    You can trust
  • 14 day money back
    Guarantee
  • Built off-road
    Tough

Since many of today's new jerry cans vary ever so slightly is size (due to manufacturing discrepancies), most fuel can mounting systems fail to secure the cans properly. There is often wiggle room between the carrier and the can. And that gap, however slight, causes rattle and wear. What's the point in strapping down your cans if they aren't truly secure? The Front Runner jerry can holders offer a smart no rattle no wear solution.

  • The adjustable locking steel clasp means your cans can be secured firmly in place over a lifetime of off-road abuse.
  • The new bolt on top strap means provides greater convenience when removing the jerry can.
  • For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.
  • The steel strap-downs cover the jerry can cap.
  • Add your own padlock and you'll never have to worry about stolen fuel while on the road.
  • Made of black powder coated stainless steel and is designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Because of the various mounting points, the vertical jerry can holder can be bolted to any flat surface and can be used in a wide variety of applications such as mounting to pickup truck beds or trailers. Not Suitable for Roof Rack fitment.
 
*Jerry Can not included


Consists of:
1x Jerry can holder
1x Jerry can strap
1x Latch
Bolt kit

Materials used:
Black powder-coated 3CR12 stainless steel

Product Dimensions:
Overall Dimensions:
363mm (14.3") L x 183mm (7.2") W x 480mm (18.9") H

Base Dimensions:
363mm (14.3") L x 183mm (7.2") W x 61mm (2.4") H

Base Bracket Dimensions:
363mm (14.3") L x 183mm (7.2") W x 417mm (16.4) H

Latch Buckle Dimensions:
38mm (1.5") W x 40mm (1.6") H

Strap Dimensions:
41mm (1.6) W x 3mm Thick

Weight:

5.2kg (11.5lbs)

Note:
For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.

Fitting instructions are not available.

Write Your Own Review
You're reviewing:Vertical Jerry Can Holder - by Front Runner
Your Rating
Product Questions
Can this be mounted on its side? (horizontal)
Question by: Leigh
Hi! This holder was designed to be mounted vertically while the Single Jerry Can Holder (sku JCHO009) is meant to be horizontal. Thank you!
Answer by: Front Runner
Just received two of these mounts. Outstanding quality. Are they only configured in one way, or are left right configurations available. I did not see that as an available option. Its not a huge issue, but would be nice for a rear mount, one left one right, where the cans could both face the same direction. Regards, Dave
Question by: Dave Maron
Dave, I'm sorry but at this time the mounts are only available in one direction. Bryan
Answer by: Front Runner
Hello, I am considering this nice product. Just wondering, where is it made? Thank you.
Question by: DrWrangler
It is manufactured at our headquarters in South Africa.
Answer by: Front Runner
Choose Your Country/Region


americas
europe
africa
oceania
asia