Check new arrivalshere!
Offline mode

Movable Awning Arm

Front Runner
|
SKU: RRAC080
63900
€639.00
incl. 19% DE VAT, excl. Shipping
FREE SHIPPING
ON ORDERS WITHIN EU*

How often have you set up your campsite, unrolled the awning, and discovered that the shade you had mid morning, is gone mid afternoon? That’s why Front Runner created the movable awning arm. It swings out, holding the awning, giving more precise control over blocking the sun.

How often have you set up your campsite, unrolled the awning, and discovered that the shade you had mid morning, is gone mid afternoon? That’s why Front Runner created the movable awning arm. It swings out, holding the awning, giving more precise control over blocking the sun.

Out of stock
Email me when this is available!
Missed it again? Resubmit a request to be notified.

Proven gear and advice

You can trust

14 day money back

Guarantee

Built off-road

Tough

Info
  • This Front Runner Slimline II Rack accessory allows you to move a Front Runner Easy-Out Awning as the sun changes position -- providing the maximum amount of shade at all times during the day.
  • The arm can be fitted to either the left or right rear corner of a Front Runner Slimline II Rack.*
  • Compatible with the 1.4m, 2m, or 2.5m sized Front Runner Easy-Out Awnings.
  • The awning can be positioned and opened at any angle between the side and the rear of the vehicle and secured using supplied guy-lines.
  • The movable arm has two (2) locking pins to allow securing the arm in windy weather to either the side of the vehicle to the rear.
  • Easy-Out Awnings mount directly to the arm.
  • Compatible with other retractable awnings brands, but drilling may be required to mount the awning track.
  • Supports awnings up to 12kg (26.5lbs).


*NOTE: This awning arm only works on racks 1358mm (53.5") L x 1255mm (49.4") W and larger. It will not work when Expedition Rails are installed in the same location as the Moveable Awning Arm. 

Consists of:
Movable awning arm
Installation hardware

Materials used:
Black powder-coated steel

Product Dimensions:
1234mm (48.6") L x 356mm (14") W x 120mm (4.7") H

Weight:
11.26kg (24.8lbs)
*A PDF viewer is required to view the fitting instructions.
{{category_id:11}},{{category_id:17}},{{category_id:18}},{{category_id:102}},{{category_id:116}}

Frequently Asked Questions

PRODUCT QUESTIONS

Can the Easy-Out Awning / 2M (TENT043) be mounted to the rear of the Slimline II Roof rack?
Can the Easy-Out Awning / 2.5M (TENT036) be mounted to the rear of the Slimline II Roof rack?

Got More Questions?

Visit our Help Center or talk to a support expert, available from Monday to Friday, 9:00 AM - 6:00 PM GMT+1.