Back to Top

Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit - by Front Runner

Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit - by Front Runner

incl. VAT excl. Shipping
In stock, usually ships in 24 hours
Product Code: KRJG004T

This 1560mm/61.4" long full size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Jeep Grand Cherokee WK2 2011+. Easily installs using the existing factory mounting points. No drilling required.

  • Proven gear and advice

    You can trust

  • 14 day money back


  • Built off-road


All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner camp tables.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRJG004T - Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit

Consisting of:

1 x FAJG001 - Jeep Grand Cherokee Foot Rails
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L)

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 27kg (60lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

Shipping Weight:

Weight 31.5kg (69.3lbs)


Product Questions

Hi, I realise there has been 2 questions on the load rating of your rack on the Jeep GC and that you have stated that it can handle more than the Jeep specified load rating of 68kgs though there is no real answer to this rating from Frontrunner. I am looking at a load of around 100 to 120 kg would you say this would be acceptable using your rack and fittings?
Question by Mark
Our Racks and Fitting will handle the load, no problem. Plan your trip ahead while considering road conditions, speeds you will travel and how the load is spread on the Rack.
Answer by Front Runner
Will this rack hold a Tepui roof top tent weighing 185 lbs?
Question by Antonia Sjoberg
Our Roof Rack Tray has a max load of 660 LBS and it lives to hold Roof Top Tents! (preferably Front Runner's - but any brand will work!)
Answer by Front Runner
Does this rack take into account the XM antenna in front of the rear hatch?
Question by Robert Howe
Yes. The rack was designed to make room for the XM antenna into account and will clear and have no effect to the signal.
Answer by Front Runner
My WK2 Limited has a sharks fin aerial which cannot be bent out of the way - how does your rack deal with this?
Question by Franz Haidinger
The rack sits high enough off the roof so that it does not interfere with the Arial.
Answer by Front Runner
Other brands of roof platforms have a cutout over the radio aerial on the rear of the jeep, will this rack cause any loss of signal if it covers the aerial.
Question by John Hage
The aerial can either be manipulated to sit between two slats or it can be tucked in under the rack.
The rack does not cause any disturbance.
Answer by Front Runner
Jeep specify the roof load of the wk2 as 68kg, your unit is 31kg leaving the total weight your rack can carry is 37kg.
Am I reading this wrong as this does not seem to be worth the effort.
Question by John Hage
All vehicles have a specification for roof loading. This is mainly for when using the factory tracks, rails and load bars. Our mounting systems are generally much stronger than the factory fitted parts & accessories.

Have a look at what we did with a Jeep Wrangler JK with the composite plastic roof.
Answer by Front Runner
Hi, what is the rated weight (static and dynamic) of the KRJG004T Jeep Grand Cherokee WK2 roof racks? Thank you.
Question by Warren Bassett
While the rack is designed to carry very heavy loads in excess of 300kg’s under testing on a bench, which is way more than your vehicle can safely carry. You need to take your vehicles handling capabilities and carrying strength into account.

We suggest that you consult your vehicle owner's manual to determine your specific vehicle's Safe Working Load weight.
Answer by Front Runner
Bought some FR load bars from you. at the time you mentioned being able to purchase parts to upgrade to a full slimline II. Do you have any more details about that?or would I need to buy the full SlimLIne II kit and just have my load bars as extras
Question by Ted Hill
It is possible. It would be best to contact us by phone and we can make sure you get all the components you need.
Answer by Front Runner

Write Your Own Review

You're reviewing: Jeep Grand Cherokee WK2 (2011-Current) Slimline II Roof Rack Kit - by Front Runner

- Online shop available
North America
United States, Canada
South Africa
Rest of the World
International Website