Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner

259.00
incl. VAT excl. Shipping
In stock, usually ships in 24 hours
Product Code
KRTT951T

This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pairs of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tundras 2007+
  • Proven gear and advice
    You can trust
  • 14 day money back
    Guarantee
  • Built off-road
    Tough

If you don’t currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Toyota Tundra factory bed rails.

This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Toyota Tundras 2007+

The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.

The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.

The sliding nut t-slots on the Load Bars allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.

Accessories can be mounted to t-slots on the top and bottom of the Load Bars. 

DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!

KRTT951T - Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner

Consisting of:

2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 7kg (15lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.


 Shipping Dimensions:

Width 240mm (9")
Length 1490mm (59")
Height 130mm (5")

 
Shipping Weight:

Weight 8.0kg (17.6lbs)

 
Write Your Own Review
You're reviewing:Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner
Your Rating
Product Questions
I recently purchased/installed a set of load bars. They look great. However, when I attach accessories (ski racks, charge baskets, etc.) they block all of my rear view. Is it possible to purchase a set of legs for the load bars that stand half as high as the current legs, but still reach out as far?
Question by: Jeremy Dalglish
The Legs (LASS026) that come with the Toyota Tundra (2007-Current) Load Bed Load Bar Kit (KRTT951T) are the only size Legs we have for our Bed Racks and Load Bed Load Bar Kits.
Answer by: Front Runner
I'm looking to purchase a James Baroud Evolution tent for the bed of my 2016 Tundra, are the load bars all that I should need to install it?
Question by: Eric
Make sure the Baroud supplied mounting brackets will fit around our Load Bars which are 3 5/8 in wide.
Answer by: Front Runner
Would this rack fit any other trucks? Specifically a 2007 Ford F-150 super crew cab with 6ft bed?
Question by: Jake
We actually offer load bar kits for other trucks, but they are not available on our website. Contact us directly at 818-253-1322 or [email protected] and we can discuss the options for your vehicle.
Answer by: Front Runner
What is the weight limit for this, planning to use it for 4p roof top tent its prabobly almost 600lb. Thanks
Question by: John
Look into the weight capacity of the OEM bed rails first. Our rack systems can hold up to 660lbs but this does not include the weight limit of the OEM bed rails.
Answer by: Front Runner
I'm interested in the load bars for a Tundra, but I have two questions. The first is are they lockable in place utilizing the referenced Toyota bed rails to deter theft? The second is are the universal yakima racks such as the fork lift and load warrior compatible with the load bars? I would assume they are, but as I have a full suite of yakima products and would like to use them on your product, I thought I'd ask first.
Question by: Ben
Ben, The legs of the load bars do not have a lock but the hardware consists of allen bolts making it more difficult it someone was trying to steal the load bars. Also, most Yakima products do work with our load bars but I would check the bolt spread on your accessories just to double check. The bolt spread would need to be about 4". -Bryan
Answer by: Front Runner
What is the max weight for these bars? I'm looking for a solution to support 600-700 pounds. Thank you,
Question by: Ben
Ben, I wouldn't recommend placing that much weight on just load bars. I would look into the manufactures load capacity of the bed rails. My concern is the OEM bed rails unable to hold that amount of weight. Bryan
Answer by: Front Runner
Choose Your Country/Region


americas
europe
africa
oceania
asia