Land Rover Defender Side Mount Jerry Can Holder - by Front Runner

incl. VAT, excl. Shipping
Product Code
Out of stock
Our famous Front Runner lockable Jerry Can Holder reconfigured to hang off the side of the vehicle via a gutter mount.
  • Proven gear and advice
    You can trust
  • 14 day money back
  • Built off-road
Our famous Front Runner Lockable Jerry Can Holder reconfigured to hang off the side of the vehicle via a gutter mount.
Since many of today's new jerry cans vary ever so slightly is size (due to manufacturing discrepancies), most fuel can mounting systems fail to secure the cans properly. There is often wiggle room between the carrier and the can and that gap, however slight, causes rattle and wear. What's the point in strapping down your cans if they are't truly secure?

For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.

The Front Runner Jerry Can Holders offer a smart no rattle no wear solution. The adjustable locking steel clasp means your cans can be secured firmly in place over a lifetime of off-road abuse.

Add your own padlock and you'll never have to worry about stolen fuel while on the road.

Steel lip protects the cap from tree branches and prying hands.

For installation, simply: Drill out the existing pop rivet in your Defender. Replaced the pop-rivet with the supplied bolt and nut which holds the Side Mount Jerry Can Holder. By using the existing pop-rivet hole, you don't have to drill into your vehicle.

If at any point you would like to remove the Side Mount Jerry Can Holder, simply undo the nut and bolt and fill the hole with a new pop-rivet.

The Front Runner Side Mount Jerry Can Holder is made of black powder coated stainless steel and is designed to mount to the rain gutter on vehicles like the classic Land Rovers.

Consists of:
1x Jerry can strap
1x Jerry can base bracket
1x Latch
Bolt kit

Materials used:
Black powder-coated 3CR12 stainless steel

Product Dimensions:
Overall Dimensions:
321mm (12.6") L x 165mm (6.5") W x 654mm (25.8") H

Base Bracket Dimensions:
321mm (12.6") L x 165mm (6.5") W x 462mm (18.2") H

Strap Dimensions:
39mm (1.5") W x 3mm Thick

Latch Buckle Dimensions:
38mm (1.5") W x 40mm (1.6") H


6.4kg (14.1lbs)

For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.

Fitting instructions are not available.

Write Your Own Review
You're reviewing:Land Rover Defender Side Mount Jerry Can Holder - by Front Runner
Your Rating
Product Questions
Hi I purchased the other day and I have a roof rack on the gutter already do i have to lift it to be able to get this under the rack in the gutter? Do i have to drill holes to attach the bottom to the body of the car?
Question by: panganayi
The vehicle needs to be drilled to mount the bottom part. The top part grabs the gutter. You can do so without lifting the rack.
Answer by: Front Runner
Can i fit one of these on either side of my 90?
Question by: jason
Yes, you can mount the side mount Jerry can holders to either side of your Defender 90 and you can do the same on a Defender 110.
Answer by: Front Runner
Hi, do you have a mounting instruction for the nut and bolt at a Defender when installing the jerry can (sequence of the installtion)? Thanks and best regards, Thomas
Question by: Thomas Groenert
I am not sure of the exact question you are asking. Please give us a call so we can further assist you with the install. Thank you!
Answer by: Front Runner
Can't his mount to a full size jeep gutter?
Question by: Justin
Justin, Can you provide us with some photos and measurements of your application? The tank was designed for a Defender so its hard to say if it will work on other applications. Feel free to email more details to [email protected]
Answer by: Front Runner
Do you think this would work on a Jeep Cherokee since it has a gutter? I am aware I would have to drill a hole.
Question by: Steve Baker
It may work, but it is difficult to say as it was obviously designed for the Defender. The gutter clamp will work fine, but the location of the bottom mount and the distance from the body are hard to say without a dry fit.
Answer by: Front Runner
Choose Your Country/Region

middle east