Toyota 4Runner (5th Gen) 3/4 Slimline II Roof Rack Kit - by Front Runner

$ 1,385.00
Incl. GST, Excl. Shipping
Product Code
Out of stock

This 1560mm/61.4" long 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (5th Gen). It easily installs using the existing factory mounting points. No drilling required.

  • Proven gear and advice
    You can trust
  • Built off-road
  • Designed

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRTF050T - Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit - by Front Runner

Consisting of:

1 x FATF002 - Toyota 4runner (2009-Current) Foot Rails - by Front Runner
1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 27kg (59lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

Shipping Weight:

Weight 31.2kg (68.6lbs)

Write Your Own Review
You're reviewing:Toyota 4Runner (5th Gen) 3/4 Slimline II Roof Rack Kit - by Front Runner
Your Rating
Product Questions
How high is the top of the rack from the top of the 4Runner?
Question by: James Lee
The 4Runner (5th Gen) 3/4 Slimline II Roof Rack will add 5" (127mm) of height overall.
Answer by: Front Runner
Will this fit 2018 4runner?
Question by: Roderick de Vera
Yes, this will fit the 2018 4Runner perfectly!
Answer by: Front Runner
I have a 2016 4 runner Trail Premium with factory mounted roof rails. Is the 5th Gen Slimline designed to use the existing roof rack holes? Do you have any recommended full or 3/4 size racks that use existing factory rails?
Question by: Mark
Our 3/4 rack uses all existing factory mounting points with no drilling required. The full size rack will require drilling for the very front mounting points only. Both options are incredibly popular and are installed routinely.
Answer by: Front Runner
Does the rack interfere with the sunroof?
Question by: Jesse
You will be absolutely fine. It does not interfere with the sunroof tilt at all. Thank you!
Answer by: Front Runner
Will I be able to purchase an extension to make into a full size roof rack for a 2016 Toyota 4runner?
Question by: chris
Hi, Chris! The 3/4 rack is set for the 3/4 size but it can be done by adding 3 slats, replacing the side profiles, and getting the full length foot rails. You'll have to give us a call to get the parts.
Answer by: Front Runner
What is the torque recommendation for the bolts attaching the side rails to the roof and the bolts attaching the rack to the side rails?
Question by: Chuck Mason
Great question, Chuck! We recommend 20Nm or 15ftlbs.
Answer by: Front Runner
Will an Eezi-Awn Batwing Awning fit on this rack with your roof top tent as well? Any concerns with big awning mounted to the smaller rack?
Question by: Pete
This Rack (KRTF050T) is 61.51 inches long and we do not recommend using awnings much longer the the Rack. That being said the Batwing is possible with a Roof TopTent. If you have any more questions please feel free to give us a call.
Answer by: Front Runner
Will this rack fit the FrontRunner featherlite tent without overhang? Do you know if it can fit a small Maggiolina?
Question by: Mike
Mike, Yes, Our tent is 48" wide (when mounted to open over the driver or passenger side of the vehicle) and our 4Runner rack is 49.5" wide, We do not know of any Maggiolina tents that will on this rack. Typically they are longer than the rack on the vehicle. -Bryan
Answer by: Front Runner
Does rack interfere with sattelite radio reception
Question by: Kevin
No, we have not heard of any issues of our rack system interfering with satellite radio.
Answer by: Front Runner
How come other manufacturers have full length racks for the 5th gen toyota 4runner?
Question by: Chappy
Other full size roof rack solutions for the 5th gen 4runner have feet or track that only balance on the roof in the forward position. Because there is nothing on the vehicle stabilizing these racks from upward g-forces, this approach is not a serious expedition grade solution. Vibrations from corrugated roads (for example) will eventually cause these racks to fail likely causing damage to the roof itself.
Answer by: Front Runner
how much weight will this rack support
Question by: michael
The rack is rated to 660 lbs, but in order to know how much weight the roof itself can handle, you would need to check with Toyota for the manufacturers specifications.
Answer by: Front Runner
Can the under rack storage slide (Product Code: TBRA013) be used with this rack?
Question by: MJ
Yes, the table slides will work great with this rack, but must be mounted sideways. You cannot load a table from the rear.
Answer by: Front Runner
Choose Your Country/Region

middle east