Back to Top

Land Rover Defender 90 Slimline II Roof Rack Kit / Tall - by Front Runner

Land Rover Defender 90 Slimline II Roof Rack Kit / Tall - by Front Runner

$1,395.00
Incl. GST, Excl. Shipping
Product Code: KRLDT07L
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
  • Proven gear and advice

    You can trust

  • Built off-road

    Tough

  • Designed

    Smart

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.

KRLDT07L - Land Rover Defender 90 Slimline II Roof Rack Kit / Tall - by Front Runner

Consisting of:

3 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 33kg (72lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 Shipping Dimensions:

Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")

 
Shipping Weight:

Weight 38.2kg (84.0lbs)

 




Product Questions

How much weight can these roof racks hold?
Question by Lee
While the rack is designed to carry very heavy loads in excess of 300kg’s under testing on a bench, which is way more than your vehicle can safely carry.
You need to take your vehicles handling capabilities and carrying strength into account. Heavy loads on the roof of the vehicle will drastically change how your vehicle handles both on and off road. Always drive in accordance with the road conditions while loaded and pay careful attention to how your vehicle behaves with a loaded roof rack and drive accordingly.
While your vehicle is stationary however, you can spread a load over the rack of more than 300kg’s without any worry of damaging your rack. (But never drive with this sort of weight on the roof.)
Refer to your vehicle owner's manual for the Safe Work Load specific to your Defender.
Answer by Front Runner

Write Your Own Review

You're reviewing: Land Rover Defender 90 Slimline II Roof Rack Kit / Tall - by Front Runner

- Online shop available
North America
United States, Canada
Europe
Europe
Africa
South Africa
Australia
Australia
Rest of the World
International Website