Nach Oben

Nissan Xterra N50 Roof Load Bar Kit (Foot Rail Mount) - Front Runner

Nissan Xterra N50 Roof Load Bar Kit (Foot Rail Mount) - Front Runner

SKU: KRNX004

​A set of foot rail mounted load bars used to transport gear on the roof of your vehicle when there is not a need for a full Slimline II Roof Rack. These allow for low profile solution and a smaller footprint.

  • Kostenlose Beratung

    Direkt Vom Hersteller

  • 14 tage

    Widerrufsrecht

  • Alle Produkte

    Offroadtauglich

You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.

  • Load bar slats are fitted to the foot rails using load bar adapter brackets that bolt onto the load bars.
  • Uses the same aluminum profiles (slats) as the Slimline II roof rack that have T-slots on both the top and bottom faces.
  • Ideal for mounting a roof tent or other accessories where a low profile and smaller footprint is preferred.
  • T-slots allow quick fitting and removal of accessories and equipment.
  • These load bars can be swapped out for the Front Runner Slimline II Roof Rack within minutes using the same Front Runner foot rails included in this kit.
KRNX004 - Nissan Xterra N50 Roof Load Bar Kit (Foot Rail Mount) - Front Runner

Consisting of:

1 x FANX002 - Nissan Xterra Foot Rail
1 x FITT002 - Fitting Instruction - Kit Vehicle Specific
1 x LBSK013 - Load Bar Pair 1165mm
1 x RRAC083 - Foot Rail Load Bar Adapter

 Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight 14kg (31lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.


 Shipping Dimensions:

Width 325mm (13")
Length 1450mm (57")
Height 175mm (7")

 
Shipping Weight:

Weight 16.4kg (36.0lbs)

 



*Ein PDF-Viewer wird benötigt, um die Montageanleitung anzusehen.

Fragen zum Produkt

Does this fit with the factory rack still on the xterra?
Question by Sam Whetstone
Luckily for you the factory rack will need to be removed. Lucky because now you'll have a much better system! The Foot Rails in the Nissan Xterra N50 Load Bar Kit / Foot Rails (KRNX004) use the mounting location of the factory rack.
Answer by Front Runner

Schreiben Sie Ihre eigene Kundenmeinung

Sie bewerten den Artikel: Nissan Xterra N50 Roof Load Bar Kit (Foot Rail Mount) - Front Runner

- Online-Shop verfügbar
Nordamerika
United States, Canada
Europa
Afrika
Südafrika
Australien
Australien
Rest of the World
International Website