This 7' full size Slimline II rack kit contains the Slimline II tray, 6 feet, Wind Deflectors, and Front Runner's Land Cruiser 100 vehicle specific track to mount the Slimline II tray to your Land Cruiser 100.
*This rack kit ships FREE via FedEx Ground to the lower 48 states. The price you see is the price you pay for the complete kit*. *CA residents must pay sales tax
THE SLIMLINE II IS STRONG.
Unlike most roof racks, the Slimline II was designed and built specifically for off-road use. Manufactured with high density aluminum and rated to carry up to 300kg/660 lbs * the Front Runner Slimline II can withstand the stress of any adventure.
The load support slats fit into a double walled aluminum extrusion channel on the side profiles and are secured via locking nuts. This patented design creates a joint support that is stronger than usual for a roof rack.
The Slimline II’s L-shaped rear and front slat design increases the strength of the entire rack, making the Slimline II the lightest and the strongest roof rack available.
(*the rack must always be loaded in accordance with the vehicle’s load rating specifications).
THE SLIMLINE II IS LIGHTWEIGHT.
Aluminum is on average 30% lighter than steel. The new Front Runner all aluminum Slimline II patented design offers the best strength to weight ratio of any roof rack. The all aluminum Front Runner Slimline II can withstand greater stresses than the best all-steel roof rack at 1/3rd less the weight.
This entire kit for the Land Cruiser 100 series (the tray at 85"/2166 mm x 52.9"/1345mm and complete mounting system) - weighs in at only 74.6 lbs.
The extra strength and lightness of the Slimline II allows heavier loads to be carried on the roof of the vehicle more safely compared to comparable all-steel roof racks. Using the lighter Slimline II Roof Rack instead of a comparable all-steel rack can lessen your vehicle’s environmental impact, decrease vehicle wear, and improve gas mileage.
THE SLIMLINE II IS MODULAR.
The Slimline II offers complete roof rack design flexibility. No other roof rack available today can be assembled by the customer to meet their specific needs.
More slats can be added to create a solid platform option for sleeping and/or sitting and enjoying sundowners. Slats can also be removed to create unobstructed access through a T-top or sunroof.
A full size rack can be quickly converted to a shorter rack with the purchase of a pair of shorter side rails. Or a smaller rack can be made longer with the purchase of longer side rails and additional slats.
Expedition style rails can even be effortlessly added to create the classic roof rack basket shape.
If any individual component of the roof rack becomes accidentally damaged, the part can be swapped out without having to replace the entire tray.
For city use, the lower profile affords easier access to underground car parks and garages. By minimizing the profile, there is less drag and noise than the typical roof rack - thereby increasing fuel efficiency and increasing performance.
To further reduce wind noise, all Front Runner Slimline II roof racks come with Wind Deflectors included.
THE SLIMLINE II IS DURABLE.
A roof rack should last as long as your vehicle. Most roof racks available today will rust, chip, and/or crack after being exposed to the elements. The Front Runner Slimline II Roof Rack will take the abuse of the sun, the rain, the gear, as well as whatever condition road you drive on.
The Slimline II tray is manufactured in South Africa entirely with corrosion free aluminum while the mounting solutions are either all aluminum or stainless steel -- ensuring a lifetime of dependability.
As an extra layer of protection, all Front Runner Slimline II roof racks and mounting solutions are powder coated satin black with one of the industry’s most durable and lasting finishes - Akzonobel’s Interpon 600 (CPO 6034). This weather resistant powder coating is formulated for exterior uses and far exceeds industry standards, with the finish showing no visible damage at 500 hours of continuous salt spray.
THE SLIMLINE II IS VERSATILE.
The Slimline II offers easy on and off mounting for any type of adventure gear. No more untying, unstrapping, un-netting the entire contents of your roof rack to remove one item. The t-slot slats and slotted side rails offer complete mounting flexibility. Loads are independently secured anywhere on the top, sides, or bottom of the rack using Front Runner’s unique bolt on system.
The Slimline II offers limitless possibilities for the end user to customize the arrangement of over 25 Front Runner roof rack accessories.
Front Runner offers roof top solutions for securing water, fuel, tents, bikes, braai* grates, skis, fishing rods, surfboards, axes, recovery jacks, spades*, bottle openers, clothes, kayaks, lights, tables, gas*, rescue tracks, spare tyres*, suitcases, chairs, potjie pots* and snowboards.
*For you Americans, that’s BBQ, shovels, propane, tires and cast iron pots. You read that correct. Cast iron pots.
And if you can’t find a Front Runner accessory for your particular brand of adventure -- secure whatever you like via bolts and the t-slots or try the Front Runner Eye Nuts with the Front Runner Stratchit. The possibilities are endless.
The Front Runner all aluminum Slimline II roof racks are engineered with modern vehicles in mind and offer strength, lightness, and functionality unmatched by any other roof rack available. Built for off-road adventure with on-road sophistication and style – the Slimline II is equally at home in the city or the wilderness.
The Slimline II Roof Rack is sold in Kits that consist of a roof rack TRAY and MOUNTING SYSTEM unique to the vehicle.
The Slimline II Roof Rack Tray comes in 55 different sizes (5 width and 11 length combinations) to create almost limitless options to fit all vehicle makes and models.
Front Runner offers over 25 rack mountable accessories. From kayak mounts, snow board holders, under table slides to bottle openers...
The broad range of Front Runner accessories can be quickly and easily bolted to the top or bottom of the flat slats or to the top and bottom of all four side profiles. This provides the most versatile, rattle-free, secure, and durable mounting solution in the roof rack industry.
Kit weight is 74.1 lbs
This kit comes complete with RRSTG11 Slimline II Tray (2166 mm x 1345mm), two (2) 40mm feet , four (4) 50mm feet , Wind Deflector, and a pair of tracks.
No drilling required.
Slimline II Tray assembly time: 30-45 minutes. A 4mm and 5mm allen wrench/hex key is required.
For VEHICLE SPECIFIC mounting instructions visit the DOWNLOADS section.
Sorry, there are no downloads at this moment. Check back soon!